|
Monster / Drag V-mount IC/Radiator for Single Turbo |
|
|
Mini Battery Kit |
|
|
V-mount content: Intercooler with Aluminum
2.75" piping, 2" racing twin-row radiator, power
steering cooler, 4-ply silicone intercooler
connectors and silicone radiator hoses, replacement front frame rail bracket bar with brackets to support the back
of the intercooler, reinforced lower radiator
L-Brackets with welded cross bar, stainless steel 1/4 inch thick modified tow hooks.
2 T-Bolt hose clamps for the intercooler hose ( 2 T-bolt clamps for the
V-mount pipe to Greddy elbow with the 4 ply silicone hose provided). 4
non-perforated worm clamps for the radiator hoses. All wires, zip ties,
crimp connectors, electrical tape and plastic wire loom are included to
extend the radiator fan harness to work with the V-mount
configuration. Silicone 4-ply intercooler connectors are available in
Red, Blue and Black. Intercooler, radiator and all supporting hardware comes with a courtesy polish. This is a free service and does not remove any deep nicks and scratches. Turbo elbow to Track v-mount for single turbo not included in kit. |
| V-Mount Optional Parts: Rotary Extreme Mini Battery Kit, Greddy Elbow, Silicone Turbo Elbow. |
| Intercooler Spec: Bar and Plate Garrett core, with internal fins, flows 1300 CFM at 15 psi, supports constant 600 whp when warmed up for track / togue / drift use and in 1/4mile drag racing it is good enough to support 785HP. This core has been able to support just over 1000hp during drag racing applications by Toyota Supras. |
| Radiator Spec: 2" thick twin row dual pass KOYO Racing radiator. |
| Requirement: Greddy elbow, Rotary Extreme Mini Battery Kit or battery relocation, after market turbo air filter and single turbo upgrade. |
