/3rd Gen RX-7 Twin Turbo V-Mount Intercooler / Radiator Combo for Stock Twins, 1999 spec twins and BNR Stage 3 twins/

V-Mount IC/Radiator
V-Mount Intake
Mini Battery Kit

V-mount content: Intercooler with Aluminum 2.75"  piping,  2" racing twin-row radiator, power steering cooler, 4-ply silicone intercooler connectors and silicone radiator hoses, replacement front frame rail bracket bar with brackets to support the back of the intercooler, reinforced lower radiator L-Brackets with welded cross bar, stainless steel 1/4 inch thick modified tow hooks. 6 T-Bolt hose clamps for intercooler hoses and 4 non-perforated worm clamps for the radiator hoses. All wires, zip ties, crimp connectors, electrical tape and plastic wire loom are included to extend the radiator fan harness to work in the V-mount configuration. Silicone 4-ply intercooler connectors are available in Red, Blue and Black.

Intercooler, radiator and all supporting hardware comes with a courtesy polish. This is a free service and does not remove any deep nicks and scratches.

V-Mount Optional Parts: Rotary Extreme Mini Battery Kit, Greddy Elbow. Rotary Extreme Cold Air Intake,  V-mount Ducting.

Intercooler Spec: Newest tube-and-fin intercooler core measures 15"x10.5"x3", with internal fins,  flows 900 CFM at 15 psi, supports constant 350 whp when warmed up for track / togue use and in 1/4mile drag racing it is good enough to support up to 600HP.

Radiator Spec: 2" thick twin row dual pass racing radiator. 

Requirement: Greddy elbow, Rotary Extreme Mini Battery Kit or battery relocation,  aftermarket intake such as Rotary Extreme V-Mount Cold Air Intake, Greddy, HKS, M2. Pettit Racing, etc.

*M2 air box  requires cutting of the air box to work with the regular V-mount. Pettit Racing intake requires cutting of the side shield.

Copyright © 2001-2012 Rotary Extreme. All rights reserved